0800 808 7799

Solenoid Valve Connectors

Solenoid Valve Electrical DIN43560A and 43650B Connectors

VDR - Part number = DIN2LEDRVDR-24V (Form A connector 1 piece c/w Red LED + VDR 24vAC/DC)

Description: A varistor is an electronic component with a "diode-like" non-linear current-voltage characteristic. The name means variable resistor. Varistor's are often used to protect circuits against excessive transient voltages by incorporating them into the circuit in such a way that, when triggered, they will shunt/move the current created by the high voltage away from sensitive components. A varistor is also known as Voltage Dependent Resistor or VDR. A varistor's function is to conduct significantly increased current when voltage is excessive.

Surge Suppression Diode - DIN2D-24V (Form A connector 1PC c/w VDR Surge Suppression Diode 24v)

Description: A surge protector (or surge suppressor) is an electronic component designed to protect electrical devices from voltage spikes. A surge protector attempts to limit the voltage supplied to an electric device by either blocking or by shorting to ground any unwanted voltages above a safe pre-set threshold.

Nass Magnet DIN 43650A Form A ISO 4400 and DIN 43650B Form B ISO6952 IP65, Built in Circuit and Pre-wired 43650A + 43650B Electrical Connectors from Nass Magnet.

The new PWM power saving DIN connector offering huge power and heat saving electrical DIN connector that extends solenoid valve life and reduces energy costs across the board. Read more about this 89% energy saving DIN connector here...

Standard range of electrical DIN connectors however please ask for Pre-wired assemblies which are also readily available and Special Connectors available with special circuits.

Solenoid Valve Connectors to DIN43650A

DIN2

  • Basic 1 Piece Black No Circuit
  • PG9 for 6 to 8 mm cable
  • NBR Seal IP65
  • Max 16 Amp
  • resistance <4 mOhm
  • Clamping contact
  • Optional Conduit Entry
  • 5 – 6mm cable
  • 1/2NPT
  • 1.5mm² Cable section max

DIN2LEDR + voltage (24 - 110 - 230v)

  • 1 Piece Clear With LED (Red)
  • PG9 for 6 to 8 mm cable
  • NBR Seal IP65
  • Max 1 Amp
  • Resistance <4 mOhm
  • Clamping contact
  • Power Consumption Max 5mA
  • Drop off delay approx 3mSec
  • Wrong polarity protection optional
  • 24v or 110v or 250v
  • Yellow + Green LED
  • 5 – 6mm or 1/2NPT
  • 1/2NPT
  • 1.0mm² Cable section max

DIN2LEDVDR + voltage (24 - 110 - 230v)

  • 1 Piece Clear With LED (Red) + Varistor (VDR)
  • PG9 for 6 to 8 mm cable
  • NBR Seal IP65
  • Max 1 Amp
  • Resistance <4 mOhm
  • Clamping contact
  • Power Consumption Max 5mA
  • Drop off delay approx 3mSec
  • Wrong polarity protection optional
  • 24v or 110v or 250v
  • Yellow + Green LED
  • 5 – 6mm or 1/2NPT
  • 1/2NPT
  • 1.0mm² Cable section max

DIN2LEDVDR + voltage (24 - 110 - 230v)

  • 2 Piece Clear With Rectifier + VDR
  • PG9 for 6 to 8 mm cable
  • NBR Seal IP65
  • Max 1 Amp
  • Resistance <4 mOhm
  • Clamping contact
  • Power Consumption Max 5mA
  • Drop off delay approx 3mSec
  • Wrong polarity protection optional
  • 24v or 110v or 250v
  • Yellow + Green LED
  • 5 – 6mm or 1/2NPT
  • 1/2NPT
  • Conduit 1.0mm² Cable section max

Torque

  • Strain Relief Nut Max 1.8Mn +/- 0.2Nm
  • Central Fixing Screw Max 0.4Nm +/- 0.1Nm
  • Contact Screw Max 0.2Nm +/- 0.1Nm

Materials Of Construction

  • Contacts CuZn, Cu/Sn plated
  • Terminal Block PA6 + 30% FG – Black or Clear
  • Screws Steel 37, zinc plated
  • Gasket Nitrile LABS-Free
  • Wire Holder PA6.6 +50% GF P7 - Blac

Other connectors available Include

FORM A ISO4400, Form B ISO 6952, Form C ISO 15217, Industrial Form (11 mm) and Micro (9.4 mm)

Solenoid Valve Connectors to DIN 43650B

DIN1

  • Basic 1 Piece Black No Circuit
  • PG9 for 6 to 8 mm cable
  • NBR Seal IP65
  • Max 10 Amp
  • resistance <4 mOhm
  • Clamping contact
  • 5 – 6mm cable
  • 1/2NPT
  • 1.0mm² Cable section max

DIN2LEDR + voltage (24 - 110 - 230v)

  • 1 Piece Clear With LED (Red)
  • PG9 for 6 to 8 mm cable
  • NBR Seal IP65
  • Max 1 Amp
  • Resistance <4 mOhm
  • Clamping contact
  • Power Consumption Max 5mA
  • Wrong polarity protection optional
  • 24v or 110v or 250v
  • Yellow + Green LED
  • 5 – 6mm or 1/2NPT
  • 1.0mm² Cable section max

DIN2LEDVDR + voltage (24 - 110 - 230v)

  • 1 Piece Clear With LED (Red) + Varistor (VDR)
  • PG9 for 6 to 8 mm cable
  • NBR Seal IP65
  • Max 1 Amp
  • Resistance <4 mOhm
  • Clamping contact
  • Power Consumption Max 5mA
  • Drop off delay approx 3mSec
  • Wrong polarity protection optional
  • 24v or 110v or 250v
  • Yellow + Green LED
  • 5 – 6mm or 1/2NPT
  • 1/2NPT
  • 1.0mm² Cable section max

Technical Links

Atex Guid (TEST)
Trouble Shooting JIS 10K Flanges
IP Ratings Seals
ANSI Flange Tables Viscosity Tables
Formulae