graphic design header

 

 Valves Home    Other Products    DIN Connectors 

Solenoid Valve Electrical DIN43560A and 43650B Connectors

VDR (Voltage Dependant Resistor) - Part number = DIN2LEDRVDR-24V (Form A connector 1 piece c/w Red LED + VDR 24vAC/DC)
Description: A varistor is an electronic component with a "diode-like" non-linear current-voltage characteristic. The name means variable resistor. Varistor's are often used to protect circuits against excessive transient voltages by incorporating them into the circuit in such a way that, when triggered, they will shunt/move the current created by the high voltage away from sensitive components. A varistor is also known as Voltage Dependent Resistor or VDR. A varistor's function is to conduct significantly increased current when voltage is excessive.
Surge Suppression Diode - DIN2D-24V (Form A connector 1PC c/w VDR Surge Suppression Diode 24v)
Description: A surge protector (or surge suppressor) is an electronic component designed to protect electrical devices from voltage spikes. A surge protector attempts to limit the voltage supplied to an electric device by either blocking or by shorting to ground any unwanted voltages above a safe pre-set threshold.

Nass Magnet
DIN 43650A Form A ISO 4400 and DIN 43650B Form B ISO6952 IP65, Built in Circuit and Pre-wired 43650A + 43650B Electrical Connectors from Nass Magnet.

The new PWM power saving DIN connector offering huge power and heat saving electrical DIN connector that extends solenoid valve life and reduces energy costs across the board. Read more about this 89% energy saving DIN connector here...

Standard range of electrical DIN connectors however please ask for Pre-wired assemblies which are also readily available and Special Connectors available with special circuits.
Part
Number

Description

Overall Dimensions

Picture


DIN2

Basic 1 Piece Black No Circuit

PG9 for 6 to 8 mm cable

NBR Seal IP65

Max 16 Amp

Resistance <4 mOhm

Clamping contact

Optional Conduit Entry

5 – 6mm cable

1/2NPT 

1.5mm˛ Cable section max

Solenoid Valve DIN Connector 43650A options

Solenoid valve DIN 43650A connector dimensions

Solenoid valve DIN connector 43650A



DIN2LEDR
+ voltage
(24 - 110 - 230v)

1 Piece Clear With LED (Red)

PG9 for 6 to 8 mm cable

NBR Seal IP65

Max 1.0 Amp

Resistance <4 mOhm

Clamping Contact

Power Consumption Max 5mA

Drop off delay approx 3mSec

Wrong polarity protection

Optional

24v or 110v or 250v

Yellow + Green LED

5 – 6mm or 1/2NPT

1.0mm˛ Cable section max
Solenoid Valve DIN Connector 43650A options
 
Solenoid valve DIN 43650A connector dimensions
 
DIN 43650A solenoid valve connector with LED



DIN2LEDVDR
+ voltage
(24 - 110 - 230v)

1 Piece Clear With LED (Red) + Varistor (VDR)

PG9 for 6 to 8 mm cable

NBR Seal IP65

Max 1.0 Amp

Resistance <4 mOhm

Clamping Contact

Power Consumption Max 5mA

Drop off delay approx 3mSec

Wrong polarity protection

Optional

24v or 110v or 250v

Yellow + Green LED

5 – 6mm  or 1/2NPT

1.0mm˛ Cable section max
Solenoid Valve DIN Connector 43650A options
Solenoid valve DIN 43650A connector dimensions
DIN 43650A solenoid valve connector with LED + VDR



DIN2R
+ voltage
(24 - 110 - 230v)

2 Piece Clear With Rectifier + VDR

PG9 for 6 to 8 mm cable

NBR Seal IP65

Max 1.0Amp

Resistance <4 mOhm

Clamping Contact

Power Consumption 0.5mA

Drop off delay approx 3mSec

Wrong polarity protection

Optional

24v or 110v or 250v

Yellow + Green + Red LED

5 – 6mm or 1/2NPT Conduit 1.0mm˛ Cable section max
Solenoid Valve DIN Connector 43650A options
 
Solenoid valve DIN 43650A connector dimensions
DIN 43650A solenoid valve connector with bridge rectifier



Torque

Strain Relief Nut Max 1.8Mn +/- 0.2Nm

Central Fixing Screw Max 0.4Nm +/- 0.1Nm
Contact Screw Max 0.2Nm +/- 0.1Nm

Materials Of Construction

Contacts CuZn, Cu/Sn plated

Terminal Block PA6 + 30% FG – Black or Clear

Screws Steel 37, zinc plated

Gasket Nitrile LABS-Free

Wire Holder PA6.6 +50% GF P7 - Black

DIN 43650A Pre-Wired Electrical Solenoid valve connectors from Connexion 01454 334990

Other connectors available Include
FORM A ISO4400, Form B ISO 6952, Form C ISO 15217, Industrial Form (11 mm) and Micro (9.4 mm)
DIN Form A Form B Form C Industrial Micro connectors
 
Solenoid Valve Connectors to DIN 43650B
Part Number

Description

Overall Dimensions

Picture


DIN1

 

Basic 1 Piece Black No Circuit

PG9 for 6 to 8 mm cable

NBR Seal IP65

Max 10 Amp

Resistance <4 mOhm

Clamping contact

Optional

5 – 6mm or 1/2NPT

1.0mm˛ Cable section max

 DIN 43650A Orientations for Connexion solenoid valve connectors
 
DIN 43650B dimensions for solenoid valve connector

DIN 43650B solenoid valve connector from Connexion 01454 334990 

 

DIN1LEDR + voltage
(24 - 110 - 230v)
1 Piece Clear With LED (Red)

PG9 for 6 to 8 mm cable

NBR Seal IP65

Max 1.0 Amp

Resistance <4 mOhm

Clamping Contact

Power Consumption Max 5mA

Wrong polarity protection

Optional

24v or 110v or 250v

Yellow + Green LED

5 – 6mm or 1/2NPT

1.0mm˛ Cable section max
DIN 43650A Orientations for Connexion solenoid valve connectors
DIN 43650B dimensions for solenoid valve connector
DIN 43650B LED solenoid valve connector from connexion 01454 334990
DIN1LEDVDR + voltage
(24 - 110 - 230v)
1 Piece Clear With LED (Red) + Varistor (VDR)

PG9 for 6 to 8 mm cable

NBR Seal IP65

Max 1.0 Amp

Resistance <4 mOhm

Clamping Contact

Power Consumption Max 5mA

Wrong polarity protection

Optional

24v or 110v or 250v

Yellow + Green LED

5 – 6mm or 1/2NPT

1.0mm˛ Cable section max
DIN 43650A Orientations for Connexion solenoid valve connectors
 
DIN 43650B dimensions for solenoid valve connector
DIN 43650B LED with VDR solenoid valve connector
Torque
Strain Relief Nut Max 1.8Mn +/- 0.2Nm
Central Fixing Screw Max 0.4Nm +/- 0.1Nm
Contact Screw Max 0.2Nm +/- 0.1Nm
Materials of Construction 
Contacts CuZn, Cu/Sn plated
Screws Steel 37, zinc plated

Gasket Nitrile LABS-Free

Wire Holder PA6.6 +50% GF P7 - Black

solenoid valve electrical connector circuit options from connexion 01454 334990

 DIN 43650B Pre-Wired Solenoid Valve Electrical Connectors from Connexion 01454 334990

 DIN Form A Form B Form C Industrial Micro connectors
 
New Nass Magnet DIN 43650A 24vDC Power Saving Electrical Connector
New Nass Magnet PWM Power Saving Electrical Form A DIN Connector
(11% to 89% Saving)
12v to 48v DC Max 1 AMP - EN 175301-803 / ISO 4400
Reduces Coil Heat and Extends Coil Life
Adjustable time periods to meet specific applications
Save Energy - Saves Energy Costs
LED Indicator Available
Output frequency 5 Khz Duty Cycle 25% to 75%
PWM Power Saving Electrical Connectors for SolenoidValvesUK.com 

 
Solenoid Valves phone
Solenoid Valves 12v ATEX high pressure Solenoid valves uk Design Solenoid Valves brass plastic stainless steel